We always want to keep ourselves clean and tidy, which is why it’s imperative that we always have clean clothes to wear every day. For this reason, the laundry machine is an essential part of any home, as they help to ensure that you always have nice-smelling clothes to wear for any occasion.
Despite how durable and tough these machines are, they are not invulnerable to damage like any other type of appliances and utility tools. Therefore, you need to understand what to do in case the machine doesn’t work as it should. In this article, we will discuss three common problems you will see with your laundry machine and what you can do to identify or even perform some necessary repairs by yourself. With that said, let’s get to it!
The Cycle Won’t Start
This is one of the most common types of problem you will see with practically any kind of electronics. There are plenty of reasons why the machine won’t run, from fundamental wiring problems to something more severe such as a damaged motor. Therefore, you need first to find out what’s wrong with it to know what you can do to fix it. The first thing you need to figure out is whether the machine is broken or it’s just the electrical plug. Try plugging in a small electronic cord into the same socket to see if it works, if it doesn’t then you’ve found the source of the issue! However, if it doesn’t the best thing to do is to call a professional to check the unit for you. This is the safest bet, especially if you’re not familiar with the internal workings of a laundry machine.
The laundry machine cleans clothes by spinning it around in the tank or drum. The water mixed with the detergent is pushed against the grain of the fabric, helping to get rid of the stains that are hard-stuck in the clothes. When the drum doesn’t spin, the entire system is put to a halt, as it won’t be able to function as it’s designed to do. One reason why the drum may not spin is due to the damaged rotor, as that’s the part of the unit that controls the spinning. Again, it’s in your best interest to work with a professional electrician to identify the problem.
This is a common problem with an old washer unit, as the filter may not have been cleaned in many years. Most modern models allow you to remove the water filter under the unit for easy cleaning. An older model, on the other hand, will require you to take out a few parts before you access the cleaning the filters. If the drain is clogged with lint, dirt or other particles, make sure you clean it out before you start your next cycle.
If you’re looking for plumbing repair service in Castle Rock, get in touch with us today for a free consultation!